A color gradient is a stretch of gradually changing color. For example, the far left side might be a dark green that progressively changes to a lighter green on the right. If a TV is able to display a gradient smoothly, that means it is able to capture small differences in color, and is therefore good at reproducing details in color. More detailed color is one of the promises of HDR media, so it’s worth getting a TV that performs well on this test if you’re interested in HDR.
For this test, we display an image with multiple horizontal color gradients, and evaluate how smoothly the TV is able to reproduce all of them. We use this result to determine the color bit depth of the TV’s panel.
When it matters
Performance with gradients illustrates how well-equipped a TV is to reproduce fine details in color. In particular, a good performer on this test should have much less of the banding that can often be seen on wide spaces of gradually changing color. Compare a TV that performed well in this area (above-left) with a TV that performed poorly in this area (above-right). Since detailed color is meant to be one of the benefits of HDR video, the results of this test are quite important for people interested in that kind of media.
Poor performance with gradients is unlikely to be a deal breaker for most, so this isn’t the most important category we test. However, as you can see from the side-by-side comparison above, there is a noticeable benefit to a TV that does well with capturing details in color, so if you want to watch HDR video, it’s still worthwhile to get a TV that performs well.
Our picture test captures the appearance of gradients on a TV’s screen. This is meant to give you an idea of how well the TV can display slight differences in color, with worse reproduction taking the form of bands of color in the image. Note that because this photo's appearance is limited by the color capabilities of your computer, screen, browser, and even the type of file used to save the image, banding that is noticeable in person may not be as apparent in the image. Above, you can compare good gradient reproduction (left) with worse reproduction (right). If you look closely, you can see more obvious banding in the right image (particularly in the green gradients).
To evaluate gradient reproduction, we take a photo of our gradient pattern in a pitch black room, with the following camera settings: F4.0, ISO-200, 1/15 sec shutter time. The image file we use is a ‘.tiff,’ as most typical image files (JPG, PNG, etc.) either don’t support 10-bit color or don’t support it well.
To send the image, we connect our test PC to the TV via HDMI, with the signal output via an Nvidia Quadro professional graphics card. We send the image to the TV through Photoshop for Windows, as it is able to output a 1080p @ 60 hz @ 10-bit signal.
After determining the highest possible color depth of the TV (see test below), we take a photo of the TV’s screen while it is displaying our gradient test image at that color depth.
Color depth is the number of bits of information used to tell a pixel which color to display. 10-bit color depth means a TV uses 10 bits for all three subpixels of each pixel, compared to the standard 8 bits. This allows 10-bit to specifically display many more colors; 8-bit TVs can display 2^(8*3) colors (16.7 million colors), versus 10-bit’s 2^(10*3) (1.07 billion colors). The images below provide an idea of what difference this makes.
10-bit is capable of capturing more nuance in the colors being displayed because there is less of a 'leap' from unique color to unique color.
A 10-bit display is only useful if you are watching a 10 bit content, which is really rare. Currently, almost everything is 8 bit, including Windows or game consoles. HDR takes advantage of 10-bit, and so getting a TV that supports 10-bit color is only important if you intend to watch HDR videos.
We verify color depth while performing our picture test. We first send our gradient test photo to our TV over an 8-bit signal and note the appearance of the gradient. We then change the Photoshop signal output to 1080p @ 60 hz @ 10-bit and send it again. If the reproduction is improved, it means the TV supports 10-bit color. We do not differentiate between native 10-bit color and 8-bit color + dithering, because we score the end result of how smooth the gradient is.
Note: Current TVs max out at 10-bit color, but sending a 12-bit signal helps to allow processing (like white balance adjustments) to be enabled without adding banding.
Our gradient score is based on the subjective impression we get from displaying our gradient test image on the TV.
We take into account the amount and severity of banding across all the gradients, with less banding working out to a higher score. Generally, a TV supporting 10-bit color should score higher than a TV that only supports 8-bit color, but this is not always true. Some 10-bit TVs struggle to display gradients smoothly, and some 8-bit TVs are very good.
Banding in gradients
Two things happen with ‘banding’: colors that are only fairly similar are made to look very dissimilar, and very similar colors that are meant to be reproduced uniquely are grouped together and made to look the same. This combination results in the appearance of bands of colors on the screen. Image processing can also create banding.
Therefore, if you see lots of banding in a gradient, it means one of three things:
- The signal isn’t carrying enough bits to differentiate lots of similar colors
- The screen’s bit depth is not high enough to follow the detailed instructions of a high-bit-depth signal
- The TV’s processing is introducing color banding
With a high bit-depth signal played on a TV that supports it (and minimal processing enabled), more information is being used to determine which colors are displayed. This allows the TV to differentiate between similar colors more easily, and thereby minimize banding.
There are two kinds of dithering, both of which can simulate the reproduction of colors:
- Spatial dithering. It is done by sticking two different colors next to each other. At a normal viewing distance, those two colors will appear to mix, making us see the desired target color. This technique is often used both in print and in movies.
- Temporal dithering. Also called Frame Rate Control (FRC). Instead of sticking two similar colors next to each other, a pixel will quickly flash between two different colors, thus making it look to observers like it is displaying the averaged color.
With good dithering, the result can look very much like higher bit-depth, and many TVs use this process to smooth out gradients onscreen. 8-bit TVs can use dithering to generate a picture that looks very much like it has 10-bit color depth.
How to get the best results
Both the screen and the signal need to have high bit-depth for the more detailed color, which means for minimal banding with TVs, you must watch a 10-bit media source on a 10-bit TV panel.
When watching HDR media from an external device, like a UHD Blu-ray player, you should also make sure that the enhanced signal format setting is enabled for the input in question. Leaving this disabled will result in banding.
If you have met these steps and still see banding, try disabling any processing features that are enabled. Things like ‘Dynamic Contrast,’ and 2 pt./10 pt. white calibration settings, can result in banding in the image.
- Wide color gamut: Allows a TV to display a wider range of colors than average. This is one of the other important elements of HDR, and should be enabled with that kind of media. Regular media will become oversaturated with this setting. This setting operates independently of bit-depth, but enabling WCG can accentuate poor gradient reproduction. Learn more about color gamuts
- Peak brightness: Makes highlights in an image extra bright. This is one of the other important elements of HDR, and should be enabled with that kind of media. Often bundled with local dimming, so enabling can sometimes introduce light blooming into darker portions. This setting operates independently of bit-depth, but enabling peak brightness can exaggerate poor gradient reproduction. Learn more about peak brightness
- Enhanced HDMI signal format: Allows for wider bandwidth signals to be received by the TV. HDR signals exceed the 10 Gbps bandwidth of typical HDMI signals, and it is necessary to enable this setting in order to prepare the TV for the wider bandwidth.
- Pretty much everything is 8-bit. Windows, OSX, JPGs, video games, etc. 10-bit media is very rare.
- For computers, only specific, professional graphics cards are guaranteed to be able to output a 10-bit signal. The Nvidia Quadro and the AMD Firepro lines both support 10-bit, so if you need that capability with your PC, you should get one of those. Some people claim to be able to force 10-bit with regular high-end graphics cards, but this is unofficial, so your mileage may vary.
- Some TVs will exhibit a lot of banding when the color settings are calibrated incorrectly. If you have changed the white balance or color settings and find your TV has banding, try restoring those settings to defaults and see if that solves the problem.
A TV’s reproduction of a color gradient indicates how well it can display details in color. It’s an important part of HDR picture, so if you want something that will handle HDR well, you should make sure to get a TV that does well on this test. For this test, we determine a TV’s maximum color depth, photograph a gradient test image displayed at that color depth, and then assign a score based on how well the test image was reproduced.
For best results with color depth, you should get a TV that is capable of displaying 10-bit color, and then play HDR media on that TV. If you meet those requirements and still experience banding, try disabling any processing features that you still have turned on, as those can lead to banding as well.